Skip to content

Fluke Networks MicroScanner PoE Cable Verifier Kit

Key features

  • Determine if a switch port can provide enough power by reporting PoE class (0-8)
  • Displays network switch speeds capabilities up to 10G
  • Displays PoE injector voltage level
  • Displays cable length, wiremap, cable ID and distance to fault
  • Locate and trace cable or wire pair with digital and analog toning with included Intellitone Pro 200 Probe
  • Included Remote IDs help quickly determine network layout
  • Validate and troubleshoot your Industrial Ethernet copper cabling, reducing downtime in time-sensitive industrial networks
  • Quickly pinpoint cable defects in facilities where network cables are exposed to vibration, flexing, moisture, temperature changes and EMI from motor drives and other devices

Product overview: Fluke Networks MicroScanner PoE Cable Verifier Kit

Fluke Networks MicroScanner PoE finds common errors and switch power capacity. Cables often fail in harsh industrial environments where cables are exposed to vibration, extreme flexing, moisture, expansion and contraction from temperature change. Failures result in costly production downtime so it’s important to quickly identify where the cable is broken so it can be replaced or repaired. MicroScanner PoE performs continuity tests on all wires in a few seconds and displays results graphically so you can see opens, shorts, and cross wires. It also reports which end of the cable has a problem and reports the distance to an open connection within the cable.

The Fluke Networks MicroScanner PoE also allows for easy installation/maintenance on IT, Security, PoE lighting, Ethernet-based HVAC devices, and IP-based Building Automation systems. Troubleshoot quickly and easily with the oversized backlit LCD screen that displays clear results in bright light or complete dark with intuitive icons, and support of Class 1 to 8 PoE.

Specification

Specifications: Fluke Networks MicroScanner™ PoE Cable Verifier Kit

Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental specifications
Operating temperature 32 °F to 113 °F (0 °C to 45 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
Safety IEC 61010-1 3rd Edition
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1
General specifications
Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs.
Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
MicroScanner™ PoE: 10.6 oz (300 g)
Display Monochrome LCD with backlight
Test modes
Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner™ PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone Generates Intellitone™ and normal analog toning signals
PoE MicroScanner™ PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices
Performance specifications
Cable types tested Twisted pair: UTP, FTP, SSTP
Length test Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner™2). Can determine actual NVP with known length of cable.
Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection MicroScanner™ PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
Tone generator Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Models

Models: Fluke Networks MicroScanner™ PoE Cable Verifier Kit

MS-POE-KIT
MicroScanner™ POE (Power Over Ethernet) Kit

Includes:

  • MicroScanner™ POE (Power over Ethernet) cable verifier with detachable wiremap adapter
  • Remote identifiers #2-7
  • IntelliTone Pro 200 Probe
  • RJ45 cord and adapters
  • Magnetic strap
  • Deluxe duffle bag
  • Test kit pouch
  • (2) AA and (1) 9V alkaline batteries
  • Getting started guide (10 languages)
  • One year warranty on testers

Resources