Skip to content

Fluke Networks MicroScanner™ Cable Verifier Kit

Key features

  • Revolutionary Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
  • Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters
  • IntelliTone Toning – trace virtually any cable or wire pair with IntelliTone digital and analog toning
  • VDV Service Detection – verifies today’s media services, including 10/100/1000 Ethernet, POTS, & PoE
  • Rugged Housing – Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs
  • Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet

Product overview: Fluke Networks MicroScanner™ Cable Verifier Kit

The MicroScanner2 Cable Verifier helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far-end device. What’s more, its integrated RJ11, RJ45, and coax test ports to support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient and troubleshooting easier.

Specification

Specifications: Fluke Networks MicroScanner™ Cable Verifier Kit

Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental specifications
Operating temperature 32 °F to 113 °F (0 °C to 45 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and vibration Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
Safety IEC 61010-1 3rd Edition
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1
General specifications
Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable.
Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
MicroScanner2: 10.6 oz (300 g)
Display Monochrome LCD with backlight
Test modes
Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone Generates Intellitone™ and normal analog toning signals
PoE MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices
Performance specifications
Cable types tested Twisted pair: UTP, FTP, SSTP
Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
Length test Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable.
Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.
Tone generator Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Models

Models: Fluke Networks MicroScanner™ Cable Verifier Kit

MS2-KIT
MicroScanner Cable Verifier Kit

Includes:

  • MicroScanner2 Cable Verifier with main wiremap adapter
  • Remote identifiers #2-7
  • IntelliTone Pro 200 probe
  • Shielded twisted-pair RJ45 patch cord
  • RJ11 patch cord
  • Clip-set RJ45 to 8 alligator clip bare wire adapter
  • F Coax push on patch cord
  • Accessory soft pouch
  • (2) AA alkaline batteries
  • (1) 9V alkaline battery
  • MicroScanner2 Getting started guide
  • Magnetic strap attachment
  • IntelliTone Pro Getting started guide
  • Packaged in a deluxe Fluke Networks carry case

Resources